Waeco AirCon Service ASC 6300 G LE Bedienungsanleitung Seite 13

5. Press ENTER to confirm.
6. Enter the password
3667
PAR
Mingliu
Unifont
ENTER‐OK
7. Use the cursor keys or to select the desired font.
• Unifont
• Mingliu
8. Press ENTER to confirm.
9. Press STOP .
The font chosen is active and the standby menu is displayed.
12.5 Setting the buzzer volume
1. Press the cursor keys or to acces the basic menu.
2. In the basic menu use the cursor keys or to select Other selections.
Short selection
Free selection
Other selections
ENTER‐OK
3. Press ENTER to confirm.
4. Use the cursor key to select Service.
5. Press ENTER to confirm.
6. Enter the password
2899
PAR
Loud
Quiet
ENTER‐OK
7. Use the cursor keys or to select the desired volume.
8. Press ENTER to confirm.
9. Press STOP .
The volume chosen is active and the standby menu is displayed.
12.6 Entering the company data
The company data is printed out with every service log.
1. In the basic menu use the cursor keys or to select Other selections.
Short selection
Free selection
Other selections
ENTER‐OK
2. Press ENTER to confirm.
3. Use the cursor key to select Service.
4. Press ENTER to confirm.
5. Enter the password
3282
The company data is shown in the third line of the display.
You can enter five lines, each with up to 20 characters.
The display shows the number of lines of company data after the message Enter company data (01 to 05).
.
FONT
.
Buzzer
.
EN
13