Waeco AirCon Service ASC 6300 G LE Bedienungsanleitung Seite 24

EN
2017
Example
R1234yf from system
Total
g.
PRINT STOP‐EXIT
R1234yf from system shows the quantity of refrigerant extracted. Here a total of 18650 g of refrigerant
was extracted by the A/C service unit in 2017.
Use the cursor key to move to the next total amount of filling refrigerant for that year:
R1234yf to system
Total
g.
PRINT STOP‐EXIT
Press the cursor key to display the monthly overview:
R1234yf from system
g.
PRINT STOP‐EXIT
Here a total of 2400 g of refrigerant was extracted in January 2017.
In the monthly overview the filled and extracted amount is always displayed alternately.
Press ENTER
13.7 Testing the air conditioning system without refrigerant service
Note The air conditioning system can only be tested on vehicles with a low pressure port and a high
pressure port or with a low pressure port only.
If you only test the function of a vehicle air conditioning system without drawing off and recycling the refrigerant,
the vehicle air conditioning system would lack the refrigerant remaining in the service hoses of the air conditioner
after the test. The A/C system test menu item has been added to compensate for this loss.
The existing standard function processes Short selection and Free selection already have a compensation
function for service hoses, which means the final air conditioning function test can be carried out in the usual man­
ner (the service hoses are drained by the A/C service unit).
1. First, fit the connections of the A/C service unit to the vehicle air conditioning system and open them.
2. Start the vehicle's engine and switch on the air conditioning system.
3. In the basic menu use the cursor keys or to select Other selections.
Short selection
Free selection
Other selections
ENTER‐OK
4. Press ENTER
5. Use the cursor keys or to select A/C system test.
24
to print out the overview. Press
to confirm.
2017
18650
2017
9000
01/2017
2400
STOP to exit the overview.