Waeco AirCon Service ASC 6300 G LE Bedienungsanleitung Seite 12

EN
7. Press ENTER
WARNING !
Usage only with
R ‐ 513A
ENTER­OK
The A/C service unit runs a cleaning phase of the internal vessel pressure.
Cleaning phase.
Internal vessel
pressure mb.
Afterwards the A/C service unit runs a software test.
Please wait!
Software test.
Don't connect to
the A/C system yet!
Afterwards the A/C service unit displays the Standby menu:
Refrigerant
PAG oil
UV tracer
11:56:35
12.3 Selecting the language
1. Press the cursor keys or .
2. In the basic menu use the cursor keys or to select Other selections.
Short selection
Free selection
Other selections
ENTER‐OK
3. Press ENTER
4. Use the cursor key to select Service.
5. Press ENTER
6. Enter the password
7. Use the cursor keys or to select the preferred language.
8. Press ENTER
9. Press STOP
The language chosen is active and the standby menu is displayed.
12.4 Setting the font
1. Press the cursor keys or to acces the basic menu.
2. In the basic menu use the cursor keys or to select Other selections.
Short selection
Free selection
Other selections
ENTER‐OK
3. Press ENTER
4. Use the cursor key to select Service.
12
to confirm the displayed refrigerant:
!
g.
ml
ml
10/03/17
to confirm.
to confirm.
.
5264
to confirm.
.
to confirm.
XXXX
XXX
XXX