Waeco AirCon Service ASC 6300 G LE Bedienungsanleitung Seite 22

EN
6. In this empty database, use the cursor keys or to select the respective entry and press
firm.
7. To change the item, press the yellow
i‐DB set
8. Enter the vehicle data (model, type) in the blank fields and press
____________
___________________
____________
9. Enter the refrigerant quantity and press
AUDI
A4 (8E)
2000 ‐ 2004
The entry has been created.
AUDI
A4 (8E)
10. Proceed as follows:
• Create another entry by using the cursor keys to select Database and proceed as described.
• To exit the menu press
13.5 Transferring the consumption of the refrigerant onto a USB
flash drive
Each time a suction or filling process (single process or fully automatic) is completed, the A/C service unit stores
all the data in the internal memory. A report of this data can be generated and transferred to a USB flsh drive.
Note The USB flash drive must be formatted with the FAT32 file system.
Each report is saved in two formats:
• As an HTML file (to be opened with any internet browser)
• As an XLS file (to be opened with Microsoft Excel)
The report may contain a logo (e.g. the workshop logo) if a graphic is copied to the USB flash drive that meets the
following requirements:
• File format: JPEG format
• File name: logo.jpg (each letter in lower case)
• Screen size: 370 x 50 pixels
The company address in the report is taken from the A/C service unit (Entering the company data on page 13).
22
0
1
Info key.
0
g. ‐‐‐ 0
0
g. ___ 0
ENTER
to confirm.
0
g. 500
0
1
STOP
.
ENTER to confirm.
ENTER to con­