Waeco AirCon Service ASC 6300 G LE Bedienungsanleitung Seite 20

EN
Service.
5. Enter the administrator code
Insert ADM Code
Note For security reasons, a new administrator code must be selected each time, but not
will deactivate the entire function.
6. Enter the new administrator code:
ADM AREA
Insert new code
7. Confirm the new administrator code:
ADM AREA
Confirm new code
8. Use the cursor keys or to select the user.
ADM AREA
User number
9. Create the four­digit personal user code. Once a code is created here, the A/C service unit can then only be
operated using this code.
ADM AREA
User number
Insert new code
10. Confirm the new user code:
ADM AREA
User number
Confirm new code
Note To switch between upper and lower case use the yellow
11. Enter the user name and press
ADM AREA
User number
User name
John Citizen
ADM AREA
User number
John Citizen
The user is created and the menu changes again to the user selection.
20
‐‐‐‐
(default setting) and press
0000
‐‐‐‐
‐‐‐‐
‐‐‐‐
1
1
‐‐‐‐
1
‐‐‐‐
ENTER to confirm:
1
1
ENTER to confirm:
Info
key.
as this
0000