Silvercrest SLE 200 B2 Bedienungsanleitung Seite 19

Emptying the water tank
The water tank
be checked by means of the fill level indicator
operated with the water tank
WATER TANK FULL LED
for approx. 20 seconds. The dehumidification stops; the fan continues to run for
approx. 3 minutes and then switches itself off.
♦ Carefully pull the water tank
grips on the side (see figure 2).
Fig. 2
♦ Empty the water tank
tank
ously selected programme.
Fig. 3
■ 16 │ GB │ IE
4
has a capacity of approx. 2.1 litres. The water level can
4
o
lights up. In addition, the appliance will also beep
4
into a sink (see figure 3) and replace the water
4
in the appliance. The appliance resumes operation with the previ-
5
. The appliance can only be
inserted. When the water tank
4
out of the appliance using the recessed
4
is full, the
SLE 200 B2