Silvercrest SLE 200 B2 Bedienungsanleitung Seite 18

DEHUMIDIFICATION
This programme offers you the option of setting the desired air humidity level that
should be achieved yourself.
♦ Press the
humidity in 5% steps between 30% and 80%. The set value flashes on the
display
value is shown again.
Additionally, you also have the option to select the setting
make a setting below 30% relative humidity. This setting allows you to achieve
a very low humidity as the dehumidification runs permanently.
Note
► The minimum humidity that can be achieved in
many factors, such as the room size or the ambient temperature, etc.
Therefore, it is not possible to define a generally applicable minimum value.
DRY LAUNDRY
You can use this programme to dry damp laundry or textiles faster. Turn the
appliance so that the air flow from the air outlet
garments you want to dry. Changes in the desired humidity are not possible in
this programme.
Timer function
The appliance is equipped with a timer function that can be activated for both
programmes. One of 24 switch-off times, ranging from 1 to 24 hours, can be
selected. Once the set time has elapsed, the appliance switches off permanently.
♦ While the appliance is running, press the
button
on the display
♦ Press the
from 1 to 24 hours. The selected switch-off time flashes on the display
approx. 5 seconds and then the current relative humidity value is displayed
again.
♦ To stop the timer prematurely, press the
button
DOWN button
TIMER LED
humidity value.
SLE 200 B2
a
UP button or the
p
for approx. 5 seconds and then the current relative humidity
z
at the same time. The
p
.
a
UP button or the
z
at the same time again. Then press the
z
to set the timer to
i
goes out and the display
z
DOWN button to set the desired
mode is dependent on
8
is directed towards the
a
UP button
i
TIMER LED lights up, and
z
DOWN button to set a switch-off time
a
UP button and the
UP button
. After around 5 seconds, the
p
shows the current relative
if you want to
and the DOWN
flashes
p for
DOWN
a
or the
GB │ IE │ 15 ■