Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; A) Charging The Internal Rechargeable Battery; B) Turning On The Dmm; Establishing A Bluetooth ® Connection - VOLTCRAFT BB-500 DMM BLACK BOX Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

12. OPERATION

a) Charging the internal rechargeable battery

Charge the internal rechargeable battery before using the meter. Set the DMM /
switch (7) to
. Connect the micro USB plug of the provided micro USB cable to the micro
USB port (8). Connect the other end of the cable (USB-A plug) to a free USB port on your
computer or USB charger.
First time charging takes approx. 8 hours. The charging indicator lamp
during charging. Once the battery has been fully charged, the charging indicator lamp turns off.
Disconnect the micro USB cable from all ports.

b) Turning on the DMM

Set the DMM /
/ PAIR button (5) to turn on the DMM. Press the
Press the
the DMM. Always turn off the DMM when not in use. The LED status indicator lamp
up in case the internal rechargeable battery is of low capacity. Recharge the battery in such a
case.
c) Establishing a Bluetooth
App
Establishing a Bluetooth
displaying device (mobile device). The app is for free and available in the Apple App Store for
iOS devices or in the Google Play Store for Android devices. Search for "SMART BT MEASURE",
download the app and then follow the installation instructions.
Your mobile device must support Bluetooth
the meter.
Refer to the app's help menu before establishing the connection. There you will find
the user manual for the app.
Connection (pairing)
• Turn on the DMM and your displaying device (mobile device). When turning on the DMM, an
acoustic signal sounds and the Link status LED starts flashing.
• Start the app and activate the Bluetooth
function on your mobile device is not activated, the app will ask for your permission to
activate Bluetooth
38
slide switch (7) to DMM to put the meter into operation.
connection
®
connection requires you to install a mobile software (app) on your
®
.
®
version 4.0 (BLE) in order to pair with
®
function on your mobile device. If the Bluetooth
®
(6) lights up red
/ PAIR button again to turn off
slide
lights
®

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis