IKAR ASS-1 Prüfbuch Und Gebrauchsanleitung Seite 31

Approved support structure in accordance with Directive 2006/42/EC for the IKAR winch for loads and persons
IKAR winch for loads and persons (PLW) as component:
The IKAR winch for loads and persons (PLW) is attached to the cantilever using the IKAR
41-54/AWS mounting bracket. This requires attaching the mounting bracket (
winch platewith three M10x16 bolts.
Insert the IKAR winch for loads and persons (PLW) with attached mounting bracket.Attach
the mounting bracket to the cantilever arm with the socket pin.
Attention: Use only IKAR mounting brackets.
Only IKAR equipment shall be mounted in IKAR mounting brackets.
Always observe the instruction manual and safety instructions for the IKAR winch for
Similar to illustration
ENGLISH
Equipment assembly ASS1/ASS3
Please note
loads and persons.
) to the
1
1
3
5
31
1
2
2
4