IKAR ASS-1 Prüfbuch Und Gebrauchsanleitung Seite 29

Personal protection - preparing for operational readiness
Operational readiness requires that the IKAR sleeve has already been installed properly.
Note whether it is horizontal or vertical. If the cantilever arm and its components are deformed and/or the welds are cracked and/or
the screw connections are loose and/or the pulleys do not rotate and/or the socket pins are inoperative, the cantilever arm cannot be
guaranteed to be in a serviceable condition and functionally safe. If a component of the equipment is not fit for use, the entire equipment
Insert the cantilever arm into the IKAR sleeve.
Release the socket pin ( ) by pressing the pressure pin with the thumb and pull out
A
Then fold the cantilever arm upwards (
The cantilever arm is now ready for basic use.
It is disassembled in the reverse sequence.
ASS-1 / ASS-3
A
Similar to
illustration
ENGLISH
will not be fit for use!
) and secure with the socket pin (
B
C
Please note
).
C
2
1
B
B
29
ASS-2 / ASS-4
A