Parkside PHSA 20-Li B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 22

When trimming young plants to the required
shape: The main growth should remain
undamaged until the hedge has reached
the planned height.
Cutting free-growing hedges
Trim the hedge regularly so that it grows
densely and does not become too high.
Cleaning and care
m WARNING! RISK OF INJURY!
Always switch the product off,
remove the battery pack
let the product cool down before
performing inspection, maintenance
or cleaning works and before
storage and transportation.
m WARNING! RISK OF ELECTRIC
SHOCK!
Do not spray the product with water. Do
not immerse the product in water.
m CAUTION! RISK OF INJURY!
Wear gloves when handling the
safety knife bar
cuts.
20 GB
[ ]
and
2 ] [
to protect against
Cleaning
NOTE
Do not use chemical, alkaline, abrasive
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces.
Never let fluids get into the motor housing
[ ]
.
The product must always be kept clean, dry
and free from oil or grease. Remove debris
from the product after each use and before
storage.
Clean after each use.
Parts
[ 2 ]
Safety knife bar
[ 5 ]
Front handle
[ 6 ]
Ventilation slots
8 ] [
Rear handle
[ ]
Motor housing
Cleaning method
Apply oil with an
oil can or spray
(Fig. I and Fig. K).
Clean with an oily
cloth.
Wipe down with
a damp cloth
(Fig. K).
Clean with a
brush.