Parkside PHSA 20-Li B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 19

Before use
Accessories
To operate this product safely and correctly,
always wear suitable personal protective
equipment.
This includes:
–
Safety goggles
–
Hearing protection
–
Protective gloves
–
Protective footwear
Unpacking
Open the packaging and remove the
product carefully.
Remove the packaging material as well
as the packaging and transport bracing
(if available).
Check that the delivery is complete.
Check the product for transport damage.
m WARNING!
The product and packaging materials are
not toys! Children must not be allowed
to play with plastic bags, film and small
parts! There is a risk of swallowing and
suffocation!
Attaching/removing the
battery pack
Attaching the battery pack: Align the
[ ]
battery pack to the battery guide track
[ 9 ]
and push it in until it locks in place.
Removing the battery pack: Press
the release button
[ ]
. Pull the battery pack out.
Checking the battery pack
charging level
(Fig. B)
[ ]
Press . The charging level LEDs
light up:
[ ]
LED
Red/orange/green
Red/orange
Red
Charging the battery pack
(Fig. C)
m
WARNING! RISK OF INJURY!
Always unplug the battery charger
[ ]
from the mains before removing
the battery pack
or inserting the battery pack.
NOTE
The battery pack
any time without reducing its life.
Interrupting the charging process does
not damage the battery pack
[ ]
on the battery pack
[
Charging level
Maximum
Medium
Low
[ ]
from the charger
[ ]
may be charged at
[ ]
.
GB
]
17