Silvercrest SNAW 1000 D2 Kurzanleitung Seite 9

Do not throw batteries into a fire or water .
■
Never expose batteries to high temperatures or direct sunlight .
■
Never open or deform batteries .
■
Do not short-circuit the terminals .
■
Remove depleted batteries from the appliance and dispose of
■
them safely .
Do not use different types of batteries together or mix new bat-
■
teries with used batteries .
Always ensure that the batteries are installed in the appliance
■
with the correctly aligned polarity .
If you do not intend to use the appliance for an extended pe-
■
riod, remove the batteries .
Check the condition of the batteries at regular intervals . Leaking
■
batteries can cause injuries as well as damage to the appliance .
Always use protective gloves when handling leaking batteries!
■
Clean the battery and appliance contacts with a dry cloth . Do
not let the chemicals get into contact with your skin and mucous
membranes, especially your eyes . In the event of exposure to the
chemicals, wash the affected area with plenty of water and seek
medical advice immediately .
First use
■ Remove all packaging materials from the appliance . Remove the protective
film from the display 3 . The transport restraint that prevents the weighing
platform 1 from being pushed down must be removed from under the
weighing platform 1 .
■ Open the battery compartment 2 on the underside of the scale and remove
the small plastic strip from between the batteries and the contacts, then close
the battery compartment 2 so that the battery compartment cover clicks into
place .
■ The scales can display weights in g (grams) and kg (kilograms) or in oz
(ounces) and lb (pounds) . Press the UNIT button 8 to change the weight
unit . The examples in these instructions always use the unit g (grams) .
■ 6 │ GB │ CY
SNAW 1000 D2