Silvercrest SNAW 1000 D2 Kurzanleitung Seite 12

NOTE
► You can only save measurements for which you have also entered a code .
► If make a mistake when entering the code, you can only change the code
before saving by entering it again . It is not possible to change the code
subsequently .
3) Now take the food off the scale and place the next item on the weighing
platform 1 .
4) Proceed in the same way to save additional nutritional values . After each
further value stored, the number of the measured value memory display r
is increased by one . The number from the last weighing is displayed .
NOTE
► The memory can store up to 99 measurements . After this, no further meas-
urement can be saved and "M99" flashes on the measured value memory
display r . If you want to save further measurements, you can delete the
saved data by pressing the MC button 5 . The M99 display goes out .
Note that by pressing the MC button 5, all previously stored measured
►
values are deleted .
► If the total for a saved nutritional or energy value exceeds the maximum
value, the display 3 will show "0-Ld " . "ΣM" and the two digits of the last
operation flash to indicate that no further measurements can be stored .
The following maximum values apply:
Displaying added measured values
You can call up added measured values at any time .
1) Press the MR button 6 . The totals of all saved measured values appear on
the display for about 10 seconds .
2) If you do not press any other button for about 10 seconds, the scales will
return to weighing mode .
SNAW 1000 D2
Weight
PROT (Proteins)
FAT
CARB (carbohydrates)
BE (bread units)
KJ (kilojoules)
KCAL (kilocalories)
CHOL (cholesterol)
99 .999 kg / 99:15 .9 lb'oz / 999 .95 oz
9999 .9 g / 352 .73 oz
9999 .9 g / 352 .73 oz
9999 .9 g / 352 .73 oz
999 .99
99999
99999
9999 .9 mg / 0 .352 oz
GB │ CY │ 9 ■