Silvercrest SNAW 1000 D2 Kurzanleitung Seite 11

Displaying nutritional and energy values
1) Place the food on the weighing platform 1 .
2) Look up the appropriate code for the food to be weighed from the food list
provided at the end of these instructions .
3) Enter the 3-digit code using the number buttons 4, e .g . 024 . All nutritional
and energy values of the respective food appear on the nutritional/energy
value displays e .
KCAL:
KJ:
FAT:
CARB:
PROT:
CHOL:
BE:
NOTE
► As energy and nutritional values fluctuate naturally, these values only serve
as guide values .
► If you make a mistake when entering the code, simply re-enter the code .
Switching the scales off
Press the ON/OFF button 9 to switch off the scales . The scales switch off .
or
Wait about 60 seconds after the last action . The scales switch themselves off
automatically .
Saving a measurement
You can save all displayed values for a food . The scales will automatically add
the values to each saved measurement . For instance, you can enter every item of
food you eat over the course of a day and view the data at the end of the day .
The saved values are retained, even after you switch off the scales or change the
battery .
1) Weigh some food as described in the previous section and enter the appro-
priate food code so that the nutritional and energy values are displayed .
2) Press the M+ button 0 to save the measurement .
ΣM XX appears on the measured value memory display r . "XX" is displayed
as a two-digit number, e .g . ΣM 01 and shows the memory location .
■ 8 │ GB │ CY
kilocalories
kilojoules
fat
carbohydrates
protein
cholesterol
bread units
SNAW 1000 D2