Silvercrest SNAW 1000 D2 Kurzanleitung Seite 10

Setting up
Place the scales on a level, firm surface . Correct measurement requires a firm
base, as the weight sensors are installed in the 4 silicone feet .
NOTE
► This appliance is provided with non-slip silicone feet . Furniture surfaces may
be made of a variety of materials and are treated with many different types
of cleaning agents . Therefore, it is not possible to entirely exclude the pos-
sibility that some of these materials contain substances that could corrode
and soften the appliance's silicone feet . If need be, place an anti-slip mat
under the silicone feet of the appliance .
Operation
Weighing items
1) Press the ON/OFF button 9 to switch on the scales .
The start display appears briefly, then "0 g" is shown automatically .
2) If you wish to weigh food without a container, place the food on the weighing
platform 1 . The weight is displayed .
If you wish to weigh the food in a bowl/container, first place the empty
bowl/container on the weighing platform 1 . Press the TARE 7 button . The
display 3 shows "0 g" q and "T" z appears on the display 3 . Place the
food in the bowl/container . The weight of the food is displayed .
Adding further items (tare)
To weigh several different substances (e .g . various ingredients for a dough)
in combination, you can set the scales to 0 each time before adding a further
substance .
■ If you wish to reset the scales to "0 g" after the first measurement in order to
measure the next ingredient, press the TARE button 7 . The display 3 shows
"0 g" q and "T" z appears on the display 3 .
SNAW 1000 D2
CAUTION
Excess or incorrect loads will cause irreparable damage to
the appliance .
► Never place food weighing more than 5 kg (11 lb) on the weighing
plate . In cases of doubt, first weigh heavy food using more sturdy
scales .
► Do not place any objects or food on the display or the buttons .
GB │ CY │ 7 ■