Parkside PGHSA 12 A1 Originalbetriebsanleitung Seite 8

GB IE NI
Cutting hazard!
Keep hands away.
Length of the chain bar
Machines do not belong with do-
mestic waste.
This device is part of the Park-
side X 12 V TEAM series
Graphical symbol above the chain
sprocket:
Saw chain oiling.
Observe direction of travel of the saw
chain. Attention! Read the instruction manual.
Graphical symbol on the blade:
Direction of travel of the saw
chain
Graphical symbol on the fi xing screw for
the chain sprocket cover:
OPEN
CLOSE
Symbol on the sprocket cover for the chain
quick-tensioning system:
loosen
tighten
8
General Safety Directions for
Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fi re and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of fl ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fi ed plugs and matching outlets will
reduce risk of electric shock.