Parkside PGHSA 12 A1 Originalbetriebsanleitung Seite 4

GB IE NI
Content
Introduction .................................4
Intended purpose .........................5
General description ......................5
Extent of the delivery ......................... 5
Function description ........................... 5
Overview ......................................... 5
Safety functions................................. 6
Technical Data ..............................6
Notes on safety............................7
Symbols used in the instructions .......... 7
Symbols used on the saw ................... 7
General Safety Directions
for Power Tools ................................. 8
Safety information
for garden pruners .......................... 11
Causes and operator prevention of
kickback ........................................ 12
Further safety directions ................... 13
Residual risks .................................. 13
Assembly ...................................13
Assembling the blade
bar and saw chain .......................... 13
Tensioning the saw chain ................. 14
Removing/inserting
the rechargeable battery .................. 15
Operating ..................................15
Switching on .................................. 15
Battery charge level indicator ........... 15
Changing the blade bar .................. 16
Sawing techniques .....................16
General information ........................ 16
Cut to length ................................... 17
Limbing .......................................... 17
Maintenance and cleaning .........18
Cleaning ........................................ 18
Maintenance intervals...................... 18
Saw chain oiling ............................. 19
Sharpening the saw chain ................ 19
Adjusting the chain tension ............... 20
Starting up a new saw chain ............ 20
Maintaining the chain bar ................ 20
Turning the blade bar ...................... 21
4
Storage ......................................21
Waste disposal
and environmental protection ....21
Replacement parts/Accessories ..22
Trouble shooting ........................22
Guarantee .................................23
Repair Service ............................24
Service-Center ............................24
Importer ....................................24
Translation of the original EC
declaration of conformity ...........93
Exploded Drawing .....................97
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for qual-
ity and subjected to a fi nal inspection. The
functionality of your equipment is there-
fore guaranteed. In some cases, residual
amounts of lubricants may be present on or
in the device. This is not a fl aw or a defect
and is no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specifi ed. Keep this
manual safely and in the event that
the product is passed on, hand over
all documents to the third party.