Herunterladen Diese Seite drucken

Vista Apex phasor Benutzerhandbuch Seite 8

Vorschau ausblenden Andere Handbücher für phasor:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26
Battery Removal & Replacement
To remove battery compartment door, press the release button and separate
from device by pulling.
Remove the old battery and replace with the new battery, ensuring that
+/- indicators are properly aligned as indicated on the battery door.
TROUBLESHOOTING GUIDE
If the suggested solutions do not rectify the problem, please call
Vista Apex 877-418-4782 (Toll Free).
PROBLEM
Composite gun will not turn on
Composite gun is not heating
Battery will not charge
Composite compules
are melting
12
POSSIBLE SOLUTION
1. Check the unit's battery indication light.
If red or no light, charge the unit.
2. Remove the battery and check orientation.
Reinsert into the device in proper orientation.
1. Verify the unit is charged.
2. Verify that an appropriate
temperature is selected.
3. With the handpiece turned off,
and battery removed, inspect the
lens for residual composite.
4. Check expiration date of composite.
1. Inspect the USB charging port of any
foreign objects that could interfere with
a proper connection.
2. Remove the battery and check orientation.
Reinsert into the device in proper orientation.
3. Make sure the battery is properly inserted
in the handpiece.
4. Make sure the charger is plugged in and
verify the outlet is receiving power.
1. Adjust heat setting to lower setting
and try again.
TECHNICAL DATA
TECHNICAL INFORMATION
Charger
Input: 100-240 VAC, 50-60 Hz
Nominal Consumption: 6W max
Manufacturer: GlobTek INC.
Model: GTM46101-1005-USB
Dimensions without blade or cable (LxWxH):
41mm x 71mm x 31.5mm
Mass: 50g
Classification: Protection class II,
Handpiece
Battery: 3.6 V nominal, 3000mAh Li-ion, 10.8 Wh
Battery Pack Manufacturer: LG CHEM LTD.
Battery Pack Model: LG-HG2-18650-INR
Dimensions (LxWxH): 150mm x 120mm x 25mm
Mass: 153g
Classification: Type BF,
Intermittent Operation: The device has been designed
solely for short-term operation.
Operating Time: Approximately 2 hrs. fully charged.
Approximately 15 heat cycles on high setting.
Operating Conditions
Temperature:
10°C - 40°C (59°F - 104°F)
10
Transport and
Storage Conditions
Relative Humidity: 30% -
90% (non condensing)
30%
PHASOR™ COMPOSITE GUN
Time to Charge Empty Battery Pack:
Approximately 3 hrs.
Atmospheric Pressure:
697hPa - 1013hPa
1013 hPa
40
C
°
C
°
697 hPa
Temperature: -20°C - 40°C (-4°F - 104°F)
40
C
°
-20
C
°
Atmospheric Pressure:
500hPa - 1400hPa
90% (max)
1400 hPa
500 hPa
13

Werbung

loading

Verwandte Produkte für Vista Apex phasor

Diese Anleitung auch für:

408800