Vista Apex phasor Benutzerhandbuch Seite 7

Routine Maintenance
Between uses, check the lens to ensure it is clean.
A dirty lens will decrease performance.
10
1. Insert the hex key provided into
the trigger bolt.
2. Rotate counterclockwise and
remove the trigger bolt once loose.
3. Slide the trigger and spring
assembly apart from the device.
When reassembling, ensure spring
is inserted into the small opening
in the trigger space.
4. Tilt the device forward to allow the
plunger to slide forward and be
removed from the device.
5. With the
nosecone
removed,
clean the
device with
the provided
brush.
6. Thoroughly clean the
plunger space and LED
lens to remove any
composite residue.
NOTE:
• Alcohol may be used
as a cleaning solution.
• DO NOT insert the
brush past the end
of the bristles.
11