Data Transfer Properties - Fronius Ri Fb Inside/I Bedienungsanleitung

(10)
(11)
NS LED (Network Status)
Status
Off
Lights up green
Flashes green
Lights up red
Flashes red
MS LED (Module Status)
Status
Off
Lights up green
Flashes green
Lights up red
Flashes red
Connection/Activity LED
Status
Off
Lights up green
Flickers green
Lights up yellow
Flickers yellow
Data Transfer
Transfer technology
Properties
Ethernet
Medium
When selecting the cables and plugs, the ODVA recommendation for the plan-
ning and installation of EtherNet/IP systems must be observed.
The EMC tests were carried out by the manufacturer with the cable IE-
C5ES8VG0030M40M40-F.
Transmission speed
10 Mbit/s or 100 Mbit/s
30
Connection/activity at M12 connection 1 LED
M12 connection 1
Meaning
No supply voltage or no IP address
Online, one or more connections established
(CIP category 1 or 3)
Online, no connections established
Double IP address, serious error
Overrun of time for one or more connections
(CIP category 1 or 3)
Meaning
No supply voltage
Controlled by a Scanner in Run state and, if CIP Sync is
enabled, time is synchronized to a Grandmaster clock
Not configured, Scanner in Idle state, or, if CIP Sync is
enabled, time is synchronized Grandmaster clock
Major error - exception state, serious fault, etc.
Correctable error - the module is configured, but there
is a difference between the parameters stored and the
parameters used (configuration process image, IP ad-
dress)
Meaning
No connection, no activity
Connection established (100 Mbit/s)
Activity (100 Mbit/s)
Connection established (10 Mbit/s)
Activity (10 Mbit/s)