General; Safety; Connections And Indicators On Rj 45 Module - Fronius Ri Fb Inside/I Bedienungsanleitung

General

Safety

Incorrect operation and faulty work can cause serious personal injury and mate-
rial damage.
All work and functions described in this document must be performed only by
trained specialist personnel who have read and understood the following docu-
ments in full:
▶
▶
▶
Connections and
Indicators on RJ
45 module
(9)
(10)
(11)
(12)
(13)
(14)
NS LED (Network Status)
Status
Off
Lights up green
Flashes green
28
WARNING!
this document
the Operating Instructions of the robot interface "RI FB Inside/i"
all documents relating to system components, especially the safety rules
(9) (10)
(1) (3) (5) (7)
(2) (4) (6) (8)
(13) (14)
Connection/activity at connection 2 LED
MS LED (module status)
RJ-45 Ethernet connection 2
RJ-45 Ethernet connection 1
Connection/activity at connection 1 LED
NS LED (network status)
Meaning
No supply voltage or no IP address
Online, one or more connections established
(CIP category 1 or 3)
Online, no connections established
(1) TX+
(11) (12)
(2) TX-
(3) RX+
(4), Not normally used; to ensure
(5) signal completeness, these
pins must be interconnected
and, after passing through a
filter circuit, must terminate
at the ground conductor
(PE).
(6) RX-
(7), Not normally used; to ensure
(8) signal completeness, these
pins must be interconnected
and, after passing through a
filter circuit, must terminate
at the ground conductor
(PE).