Connections And Indicators On M12 Module - Fronius Ri Fb Inside/I Bedienungsanleitung

NS LED (Network Status)
Lights up red
Flashes red
MS LED (Module Status)
Status
Off
Lights up green
Flashes green
Lights up red
Flashes red
Connection/Activity LED
Status
Off
Lights up green
Flickers green
Lights up yellow
Flickers yellow
Connections and
Indicators on
M12 module
(6)
(7)
(8)
(9)
Double IP address, serious error
Overrun of time for one or more connections
(CIP category 1 or 3)
Meaning
No supply voltage
Controlled by a Scanner in Run state and, if CIP Sync is
enabled, time is synchronized to a Grandmaster clock
Not configured, Scanner in Idle state, or, if CIP Sync is
enabled, time is synchronized Grandmaster clock
Major error - exception state, serious fault, etc.
Correctable error - the module is configured, but there
is a difference between the parameters stored and the
parameters used (configuration process image, IP ad-
dress)
Meaning
No connection, no activity
Connection established (100 Mbit/s)
Activity (100 Mbit/s)
Connection established (10 Mbit/s)
Activity (10 Mbit/s)
(7)
(6)
2
3
5
1
4
(9)
(10)
MS LED (module status)
Connection/activity at M12 connection 2 LED
M12 connection 2
NS LED (network status)
(1) TXD+
(8)
(2) RXD+
(3) TXD-
(4) RXD-
(5) Shield
(11)
29