Endress+Hauser Proline 300 Bedienungsanleitung Seite 4

EA01278D
1 Overview of spare parts kits
The installation instructions apply to the following spare parts kits:
Order number
71453166
71453168
71453169
2 Intended use
• A defective unit can only be replaced with a functioning unit of the same type.
• Use only original parts from Endress+Hauser.
• Check in the W@M Device Viewer if the spare part is suitable for the existing measuring
device.
In some measuring devices, an overview of spare parts is provided inside the device. If
the spare part set is listed in the overview, it is not necessary to check the Device Viewer.
www.endress.com/deviceviewer
3 Personnel authorized to carry out repairs
Authorization to carry out repairs depends on the measuring device' s approval type. The table
below shows the authorized group of people in each case.
Whoever carries out the repairs has full responsibility to ensure that work is carried out
safely and to the required quality standard. He/she must also guarantee the safety of the
device following repair.
4
Original spare parts kit
S-DAT set, Promag, Teqwave M 300, 400, 500
S-DAT set, Promass, t-mass 300, 500
S-DAT set, Prosonic Flow 300, 500
Ser. No.: 12345...
Order code Description
=
=
Contents
1 × S-DAT, unprogrammed
1 × S-DAT, unprogrammed
1 × S-DAT, unprogrammed
Endress+Hauser