Overview Of Spare Part Sets; Intended Use - Endress+Hauser Promag 400 Index C Installationsanleitung

EA01098D
1

Overview of spare part sets

The Installation Instructions apply to the following spare part sets:
Order number
71228790
71228791
71540053
• The order number of the spare part set (on the product label on the package) can differ
from the production number (on the label directly on the spare part)!
• You can find the order number of the relevant spare part set by entering the
production number of the spare part in the spare part search tool.
• We recommend that you keep the Installation Instructions and packaging together at
all times.
2

Intended use

• A defective unit can only be replaced with a functioning unit of the same type.
• Only use original parts from Endress+Hauser.
• Check in the W@M Device Viewer if the spare part is suitable for the existing measuring
device.
A spare parts overview is located in the interior of some measuring devices. If the spare
parts kit is specified on this list, no inspection is required.
www.endress.com/deviceviewer
4
Original spare part set
Connection board set, remote version,
electronics for sensor D, L, W
Connection board set, compact version, electronics for sensor D
Connection board set with S-DAT, Prosonic Flow 400
Ser. No.: 12345...
Order code Description
=
=
Contents
1 × connection board
1 × connection board
1 x connection board
Endress+Hauser