Endress+Hauser Proline 300 Bedienungsanleitung Seite 29

10.2 Reassembling the transmitter housing, remote version
Reassembly is carried out in reverse order as described in Section 10.1 →  28. Note the
following:
10.2.1 Standard transmitter
NOTICE
Damage to the measuring device!
The measuring device can be destroyed if the grounding switch is in the incorrect position.
‣
Check that the grounding switch is in the correct position and correct if necessary!
1 →
‣
Version A: If a grounding switch
is provided on the ISEM: set the
grounding switch of the ISEM to
the "right" position (open).
10.2.2 Transmitter, isolated from ground option
NOTICE
Damage to the measuring device!
The measuring device can be destroyed if the grounding switch is in the incorrect position.
‣
Check that the grounding switch is in the correct position and correct if necessary!
1
‣
Set the grounding switch of the
ISEM to the "right" position
(open).
Endress+Hauser
2
‣
Version B: If a jumper is
provided on the ISEM: plug in
the jumper for the ISEM
grounding setting on the outside
(open).
EA01278D
29