Endress+Hauser Proline 300 Bedienungsanleitung Seite 20

EA01278D
8.3 Replacing the S-DAT Promass, t-mass, Prosonic Flow
Proceed as described in Section 8.1 →  18 and as illustrated in the graphics below.
Use a long-nose pliers to pull the S-DAT including the carrier board gently upwards. Use a
screwdriver to carefully release the securing tabs (A) of the carrier board and pry out the
carrier board together with the S-DAT.  Do not damage or bend pins!
1 →
A
‣
Promass, t-mass
2
A
‣
Prosonic Flow
20
1.
1.
2.
2.
Endress+Hauser