Endress+Hauser Proline 300 Bedienungsanleitung Seite 14

EA01278D
7.5.2 Transmitter, isolated from ground option
NOTICE
Damage to the measuring device!
The measuring device can be destroyed if the grounding switch is in the incorrect position.
‣
Check that the grounding switch is in the correct position and correct if necessary!
1
‣
Set the grounding switch of the
ISEM to the "right" position
(open).
7.6 Note on reassembling the Promag 500
7.6.1 Standard transmitter
NOTICE
Poor measuring performance!
If the grounding switch is in the wrong position, this impacts the measuring performance!
‣
Check that the grounding switch is in the correct position and correct if necessary!
1 →
‣
Version A: If a grounding switch
is provided on the ISEM: set the
grounding switch of the ISEM to
the "right" position (open).
14
2
‣
Version B: If a jumper is
provided on the ISEM: plug in
the jumper for the ISEM
grounding setting on the outside
(open).
Endress+Hauser