Siemens SIMATIC NET CP 5611 A2 Installationsanleitung Seite 57

Installation Instructions CP 5611 A2
5 Changing from CP 5611 to
CP 5611 A2
The CP 5611 A2 can be used as a substitute for the
CP 5611. This requires neither software updates nor a
change to the configuration.
Follow the steps below:
Step
1 Turn the PC off.
2 Remove the CP 5611.
3 Insert the CP 5611 A2 in the same PCI slot.
4 Restart the PC.
Note
When the Windows hardware wizard appears,
confirm the proposed steps.
Caution
Observe the warnings and safety-related notices.
Note
The previously used configuration is loaded automatically.
Installation Instructions CP 5611 A2
A5E00469482-01
Procedure
57