Ferm Ferax FVS-950 Handbuch Seite 37

ANGLE GRINDER
The numbers in the following text refer to
the drawing on page 2 - 3.
Read this operators guide carefully,
before using the machine. Ensure that
youknowhowthemachineworks,and
howitshouldbeoperated.Maintain
themachineinaccordancewiththe
instructions, and make certain that the
machine functions correctly. Keep this
operator's guide and other enclosed
documentationwiththemachine.
Contents
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
Introduction
The angle grinder is suitable for non-
professional use for cutting or separating
materials. Any other use is strictly forbidden.
1. MACHINE DATA
Technical specification
Voltage
Frequency
Power input
No-load speed
Disc diameter
Spindle dimension
Weight
L (sound pressure)
pa
L (sound power)
wa
Vibration value
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment
of exposure to vibration when using the tool for
the applications mentioned
- using the tool for different applications,
or with different or poorly maintainted
accessories, may significantly increase the
exposure level
- the times when the tool is switched off or
Ferax
230 V~
50 Hz
950 W
0 - 10000/min
125 mm
M 14
2.5 kg
91 dB (A)
102 dB (A)
8.79 m/s
2
when it is running but not actually doing
the job, may signifi cantly reduce the
exposure level
Protect yourself against the effects of
vibration by maintaining the tool and its
accessories, keeping your hands warm, and
organizing your work patterns.
Contents of packing
1 Angle grinder
1 Side handle
1 Spanner
1 Instruction manual
1 Safety instructions
Check the machine, loose parts and
accessories for transport damage.
Features
Fig. 1
1. On/off switch
2. Guard
3. Side handle
4. Grinding disc
5. Spindle lock
6. Release button
2. SAFETY INSTRUCTIONS
In this manual and/or on the machine the
following symbols are used:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Keepbystandersaway
Wear ear and eye protection
Wear protective gloves
GB
37