Hettich ROTOFIX 32 A Gebrauchsanweisung Seite 61

5.4 Switching the centrifuge on and off.
Switching the centrifuge on
Switching off the centrifuge
6 Operation
6.1 Opening and closing the lid
Opening the lid
Closing the lid
6.2 Removing and installing the rotor
Removing the rotor with a
clamping nut
AB1207en
Personnel:
■
Trained user
Set the mains switch to
�� The buttons flash, depending on the centrifuge type.
The last centrifugation data used is displayed.
The rotor is stationary.
Set the mains switch to
Personnel:
■
Trained user
The centrifuge is switched on.
The rotor is stationary.
1. Swivel the handle strip on the lid upwards.
'Lid open' indicator appears.
�� The
2. Open the lid.
NOTICE
Damage to the device caused by the lid slamming.
−
Close the lid slowly.
−
Do not slam the lid.
Personnel:
■
Trained user
Close the lid and swivel the handle strip downwards
'Lid closed' indicator appears.
�� The
Personnel:
■
Trained user
Rev.: 00 / 11.2023
[I] .
[0] .
Operation
19 / 38