Commissioning
5
Commissioning
5.1
Unpacking the centrifuge
16 / 38
1
2
3
Fig. 13: Transport lock
1
Transport lock
2
Spacer sleeves
3
Screws
1.
Tilt the device on the back of the device.
2.
Insert 3 transport locks (
3.
Screw in 3 screws (
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
−
Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
CAUTION
Risk of injury from lifting heavy loads.
−
Provide an adequate number of helpers.
−
Note the weight. See ⮫
on page 9 .
NOTICE
Damage to the device due to improper lifting.
−
Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■
Trained user
1.
If present: Remove the packaging tapes.
2.
Lift the box up and remove the padding.
Rev.: 00 / 11.2023
2
2
1 ).
3 ) with spacer sleeves ( 2 ).
Chapter 3.1 'Technical data'
3
2
3
AB1207en
1