Carl Valentin SPX II Serie Kurzanleitung Und Hinweise Zur Produktsicherheit Seite 129

Key:
Print length +/−
Key:
Write log files on MC
Main Menu
Switch on the print module and the display shows the main menu. The main menu shows information such as device type,
current date and time, version number of firmware and the used FPGA.
The selected display is shown for a short time, then the indication returns to the first information.
Press key to arrive the next information display.
Indication of print layout correction in percent.
By mechanical influences (e.g. label roll size) the print layout can be printed increased and
reduced to its original size.
Value range: +10.0 % ... −10.0 %
With this command, different log files are saved on an existing storage medium (memory card).
After the 'Finish' message the storage medium can be removed.
The files are in directory 'log':
LogMemErr.txt: Logged errors with additional information such as date/time and file name/line
number (for developers).
LogMemStd.txt: Logging of selected events.
LogMemNet.txt: Data latest send via port 9100.
Parameters.log: All printer parameters in human readable form.
TaskStatus.txt: Status of all printer tasks.
English
SPX II
129