Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SPX II
Connect the CV Rewinder for Backing Paper
NOTICE
!
Only one rewinder for backing paper that fulfills the fire protection requirements according to EN 62368-1 can be
connected.
Switch off the print module.
Install the CV rewinder for backing paper with an external mounting plate at the appropriate position at the packaging
machine.
Insert plugs of backing paper rewinder into the socket provided for it.
Tighten the lateral protective screws at the connection plug in order to prevent an inadvertent removing of connection plug
in running operation.
CAUTION!
The print module can be damaged by defective hardware.
Switch on the print module.
After switching on the module the main menu appears which shows the model type, current date and time
Initial Operation of the Print Module
After all connections are completed, switch on the printing system. The main menu appears which shows the type of
printing system, current date and time.
Insert label material and transfer ribbon.
Start measuring in menu Label layout/Measure label.
Press the key
to finish measuring.
NOTICE!
To enable correct measuring, at least two completed labels have to be passed through (not for continuous labels).
During measuring the label and gap length small differences can occur. Therefore the values can be set manually in menu
Label layout/Label and gap.
116
English
Werbung
