Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Unpack the Print Module
Lift the printing system on the bottom and remove it from the carton.
Check the print module for transport damages.
Remove the foam transportation safeguards near the printhead.
Check delivery for completeness.
Scope of Delivery
•
Print module.
•
Power cable.
•
Data cable for USB interface.
•
I/O accessories
(female connectors for I/O, I/O 24 cable).
NOTICE!
Retain original packaging for subsequent transport.
Set up the Print Module
CAUTION!
The label printer and the print media can be damaged by moisture and water.
Set up the print module only in a dry place protected from sprayed water.
Mount the print module on a vibration-free and air draught-free.
Open the cover of print module.
Remove the foam transportation safeguards near the printhead.
Connect the Print Module
The print module is equipped with a versatile power supply unit. The device may be operated with a mains voltage of
100 ... 240 V AC / 50-60 Hz without any adjustments or modifications.
CAUTION!
The direct print module can be damaged by undefined switch-on currents.
Set the power switch to '0' before plugging in the direct print module.
Insert the power cable into the power connection socket.
Insert the plug of power cable into a grounded electrical outlet.
NOTICE!
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the print module are grounded.
Connect the print module to a computer or network with a suitable cable.
•
1 transfer ribbon roll.
•
Empty core, mounted on transfer ribbon rewinder.
•
Cleaning foil for printhead.
•
Product Safety Guide.
English
SPX II
115
Werbung
