Endress+Hauser Proline Promag W 400 Einbauanleitung Seite 7

4.2 Symbols for certain types of information
Symbol Meaning
Permitted
Procedures, processes or actions that are permitted.
Forbidden
Procedures, processes or actions that are forbidden.
Tip
Indicates additional information.
, , ... Series of steps
1. 2. 3.
5 Tools list
Allen key
3 mm, 4 mm
Pin/tool Ø ≤ 2 mm
(0.08 inch)
6 Conversion of Promag 5W4B, 5L4B compact version to
Promag 5W4C, 5L4C compact version
6.1 Backing up the data
A) Read and note the parameters on the display and save them to the new electronics
module following the conversion.
or
B) Read the parameters out of the T-DAT via the webserver using the parameter
download function "Data management/Device configuration/Load settings from device",
save the .xml file to the PC with the "Save to device" function, and save the parameters to
the new electronics unit.
Endress+Hauser
Hexagon spanner
Phillips screwdriver
7 mm
Slotted head
screwdriver
PH2
0.5 × 3.5 mm
EA01090D
Torx screwdriver
T10, T20
7