Endress+Hauser Proline Promag W 400 Einbauanleitung Seite 15

17 (0.67)
1. Drill the holes. 2. Insert wall plugs into the drilled holes. 3. Screw the securing screws in slightly. 4.
Fit the transmitter housing over the securing screws and hook into place.
5. Tighten the securing screws.
For detailed information on the electrical connection, see the "Electrical connection"
section of the Operating Instructions for the device.
For detailed information on commissioning, see the "Commissioning" section of the
Operating Instructions for the device.
7.3 Modifying the label
Following conversion, enter the date of the conversion on the information label and attach
the information label (1) in accordance with the diagram.
1
1
Endress+Hauser
14 (0.55)
5.8 (0.23)
5.8 (0.23)
= =
149 (5.85)
EA01090D
15