Endress+Hauser Proline Promag W 400 Einbauanleitung Seite 14

EA01090D
7 Conversion of Promag 5W4B, 5L4B remote version to
Promag 5W4C, 5L4C remote version
7.1 Backing up the data
A) Read and note the parameters on the display and save them to the new electronics
module following the conversion.
or
B) Read the parameters out of the T-DAT via the webserver using the parameter
download function "Data management/Device configuration/Load settings from device",
save the .xml file to the PC with the "Save to device" function, and save the parameters to
the new electronics unit.
7.2 Mounting the wall-mount housing
7.2.1 Ambient temperature too high!
NOTICE
Danger of overheating!
Danger of electronics overheating and housing deformation.
‣
Do not exceed the permitted maximum ambient temperature.
‣
If operating outdoors: Avoid direct sunlight and exposure to weathering, particularly in
warm climatic regions.
‣
Excessive strain can damage the housing! Avoid excessive mechanical stress.
14 Endress+Hauser