Endress+Hauser Proline Promag W 400 Einbauanleitung Seite 10

EA01090D
6.4 Reassembling the Promag 5W4C, 5L4C transmitter, compact
version
Version A: If a grounding switch is provided on the ISEM module:
Set the grounding switch of the ISEM electronics module to the position on the "left"
(closed), as illustrated in the diagram below.
1
Version B: If a jumper is provided on the ISEM module:
Set the jumper grounding setting on the ISEM electronics module so that it is pointing
inwards (closed), as illustrated in the diagram below.
1
10 Endress+Hauser