HBM QUANTUMX MX403B Bedienungsanleitung Seite 7

MX403B
A3757-1.0_en/de/fr
2.1.1 Symbols on the measurement module
Take details in the operating manual into account
Read and comply with the operating manual.
2.2 Proper use
The MX403B voltage measurement module fits perfectly
into the modular QuantumX series and is solely used to
measure high differential voltages or differential voltages
at high potential to remote ground, within the ratings
stated in the specifications.
The device is not intended for use as a safety compon­
ent. Please also refer to the section: "Additional safety
precautions".
Proper and safe operation requires proper transportation,
correct storage, siting and mounting, and careful opera­
tion.
Everyone involved with siting, starting up, or operating
the measurement module must have read and under­
stood the operating manual and in particular the technical
safety instructions.
In the interests of safety, the measurement module
should only be operated by qualified personnel (see be­
low) and as described in the operating manual. It is also
essential to comply with the legal and safety require­
ments for the application concerned during use. The
same applies to the use of accessories.
7