HBM QUANTUMX MX403B Bedienungsanleitung Seite 24

6 MX403B operation
NTX001
24
6.1 Preparatory measures and starting up
"
Install a QuantumX application (such as the
QuantumX Assistant) on a PC.
"
Use FireWire or Ethernet to establish a physical data
link between the MX403B and the PC.
"
Supply the MX403B with a DC voltage of 10 V - 30 V
(24 V recommended).
The direct current supply must be a SELV voltage
supply that meets the requirements of IEC / EN / DIN
EN 60950­1. The supply voltage must be protected
where applicable by a suitable DC fuse (e.g. LITTEL­
FUSE KLKD 6, LFPHV001).
Or
1-Kab271-3
1-Kab272
FireWire
"
Make sure that all the disconnecting devices and the
emergency stop and emergency OFF devices are
easily accessible and can be reached by third parties
EN 61010­1:2010 5.4.4 b
MX403B
A3757-1.0_en/de/fr