HBM QUANTUMX MX403B Bedienungsanleitung Seite 14

14
2.7 Transportation, storage and disposal
S When unpacking the contents of the package, check
that everything is present. When it is unpacked, the
MX403B should be inspected for mechanical damage.
If damage has occurred during transit, the measure­
ment module must not be operated. Keep the original
packaging in case subsequent transportation is ne­
cessary. Any shipping damage caused by inadequate
packaging is excluded from the warranty.
S Store the MX403B somewhere dry and enclosed. If
the MX403B has been transported at extreme temper­
atures, you should wait for at least 2 hours to allow
the device to acclimatize, before switching it on.
S In accordance with national and local environmental
protection, material recovery and recycling regula­
tions, old measurement modules that can no longer
be used must be disposed of separately and not with
normal household waste.
DANGER
If the measurement module is damaged, operated
without being acclimatized, or incorrectly stored or trans­
ported, the protection provided by the measurement mod­
ule may be impaired.
MX403B
A3757-1.0_en/de/fr