HBM QUANTUMX MX403B Bedienungsanleitung Seite 11

MX403B
A3757-1.0_en/de/fr
2.4 Operating conditions
S See the specifications for the permissible operating
temperature, as well as the permissible storage and
transportation temperatures. If the MX403B has been
stored or transported in extreme temperatures, you
must wait for at least 2 hours before switching it on.
S Do not expose the measurement module to direct
sunlight. The protection provided by the MX403B may
be impaired if the device is exposed to intense sun­
light for too long, including behind car windows, for
example.
S The operating position is optional.
S Protect the measurement module against direct con­
tact with water and moisture, as well as weather con­
ditions such as rain or snow. Should condensation
have formed during transportation or storage, the
MX403B must be acclimatized for at least 2 hours be­
fore being put into operation.
S Do not operate the measurement module above the
maximum operational height of 2000 m.
S The MX403B is designed for use in clean and dry
rooms with degree of pollution 2; cables must not be
routed through outdoor areas. It must not be operated
where the air has a particularly high dust content,
where there is a risk of explosion or in an aggressive
chemical environment.
DANGER
If the measurement module is used outside the rated op­
erating conditions, the protection provided by the meas­
urement module may be impaired.
11