MX403B
A3757-1.0_en/de/fr
2.6
Cleaning
Please note the following points when cleaning the hous
ing:
S Disconnect the measurement module from all current
and voltage supplies.
S Also switch off the feeding QuantumX module.
S Clean the housing with a soft, slightly damp (not wet!)
cloth. Never use solvent as this could damage the la
beling or the housing.
S When cleaning, ensure that no liquid gets into the
measurement module or connections.
S Give the MX403B sufficient time to dry before starting
it up again.
DANGER
If the measurement module is not properly cleaned, the
protection provided by the measurement module may be
impaired.
13