Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Channel scan
Briefly press the HI/LO [6] key on the side of the CB radio to change bet-
ween high (4 W) and low (1.5 W) transmission power. The HI or LO icon
will appear on the screen.
Dual Watch
Long press the DW [11] key. The DW icon and the digits corresponding
to the channel blink on the screen. Press the or key to choose the second
channel you want to monitor. Press the DW key again to save and exit.
To activate the Dual Watch mode, briefly press the DW key. The two
channels set for simultaneous monitoring will be displayed successively
on the screen. The DW icon is blinking. Short press the DW key to exit.
NCR (Noise Reduction Circuit)
Briefly press the NRC/LOOK [15] key to activate the background noise
reduction function. The NRC icon appears on the screen.
Briefly press the NRC/LOOK key again to disable the NRC function. The
NRC icon disappears from the screen.
LCR (Last Channel Recall)
Briefly press the LCR/VOX [12] key to return to the last channel you
stayed on for more than 5 seconds. Press LCR/VOX again to return to
the original channel.
VOX
Long press the LCR/VOX [12] key to activate the VOX function. The VOX
icon appears on the screen.
By activating the VOX function, you can transmit without pressing the PTT
key. The VOX sensitivity level can be set from the menu.
Long press the LCR/VOX [12] key to disable the VOX function. The VOX
icon disappears from the screen.
- 8-
Werbung
