Automatic Cleaning; Room Clean-Up; Area Cleaning; Local Cleaning - eta MASTER 2 PRO Gebrauchsanleitung

B) Virtual wall (Virtual
• Switch over setting to
• After that, click on
• You can insert a virtual wall in the map
10
move and change its size and direction
with your finger.
• If you want to remove a virtual wall, click
directly on it with a finger and then click
on „x".
• Finally, save the created walls by
clicking „Save".
REMARKS:
• Having finished all necessary settings, save the map.
• 14 forbidden zones of each species and 14 virtual walls can
be inserted into the map.

6. AUTOMATIC CLEANING

• On the main screen, click to open the
cleaning modes menu (Automatic cleaning
is set as default).
• Then select „AUTO
„Confirm".
1
• Then click on the
cleaning.
• The vacuum cleaner systematically scans
all rooms in the map where it is granted
access and cleans them according to the
selected settings. It then returns to the
charging station.
NOTES:
• It is one of the most usable cleaning modes, when the vacuum
cleaner cleans up the whole available area.
• Automatic cleaning is also being used for the primary creation of a map.
wall)
„Virtual wall".
„Add wall"
1
1
cleaning" and click
button to start
2

7. ROOM CLEAN-UP

• On the main screen, click to open the
cleaning modes menu.
• Then select „Room cleaning" and click
„Confirm".
• Then click on one or more rooms you want
to clean. The selected rooms will
be colored.
• Then click on the button to start
cleaning.
• After cleaning, the vacuum cleaner
automatically returns to the charging
station.

8. AREA CLEANING

• On the main screen, click to open the
cleaning modes menu.
• Then select „Zone cleaning" and click
„Confirm".
• On the left side of the screen, 2 buttons
have been made available - „x 1", which
can be used to select how many times the
robot should vacuum a given zone, and „+
Sweep area", which can be used to insert
individual zones into the map. The zone
can be moved, rotated, named and resized
on the map with your finger.
• If you want to remove a zone, click directly
on it with a finger and then click on „x".
• Then click on the button to start
cleaning.
• After cleaning, the vacuum cleaner
automatically returns to the charging
station.
NOTES:
• You can set up to 5 different zones for zone cleaning.
• The vacuum cleaner will clean all the zones created during zone
cleaning.

9. LOCAL CLEANING

• On the main screen, click to open the
cleaning modes menu.
• Then select
„Local
„Confirm".
• Click on a place in the map with a finger,
where you want to perform local cleaning.
1
The point around of which local cleaning is
to be performed will be shown in the map.
• Then click on the
cleaning.
• After cleaning, the vacuum cleaner
automatically returns to the charging
station.
NOTES:
• Within local cleaning, the vacuum cleaner cleans a square around the
set point with sizes of 1.5 x 1.5 m.
• The vacuum cleaner uses the maximum suction power during local
cleaning, and passes twice throughout the set area.

10. CLEANING AND MOPPING PARAMETERS

• On the main screen, click
preference"
• Several setting options will appear
cleaning:
1) Wetting level during mopping with the
1 option to turn mopping off.
2) Adjustment of the suction force with the
possibility of switching off suction.
3) Activating custom settings from the
map editing section (chapter 5.6).
4) Activating a special movement for
more thorough Y-shaped mopping.
ENG
cleaning" and click
button to start
„Cleaning
to open the menu.
ENG - 40