NOTES:
• If you are using multiple maps (e.g. a multi-storey household), always
make sure to activate only the scheduled cleanings that belong to the
map you are currently using.
• You can set up to 15 scheduled cleanings.
14. HISTORY OF CLEANINGS
• Go to settings „
1
• Click on
„Clean
Record".
• By this, you will obtain simple review of the
performed cleanings.
• Click on a particular cleaning in the list
2
of cleanings in the history to see detailed
information on the corresponding cleaning.
3
".
15. LANGUAGE AND VOLUME
1
REMARKS:
• Audio warnings may be also switched-off in a certain moment by
means of „Do not disturb mode" (see Chapter 16. DO NOT DISTURB
MODE).
• Click on „Delete" in the top right corner to
see a selection of individual cleanups.
• You can mark the ones you want to delete.
You can then delete the selected cleanings
1
by clicking on „Delete" in the lower right
corner.
• Go to settings „
".
• Click on
„Voice and
volume".
1
• Now you may set sound volume and
language of the audio warnings or may
fully switch-off them.
16. DO NOT DISTURB MODE
• Go to settings „
".
• Click on
„Switch
disturb".
• You can now set a time range when voice
notifications will be turned off and the robot
will ignore scheduled cleanings.
• To activate this mode, use a switch in the
right upper corner.
17. REMOTE CONTROL
• Go to settings „
".
• Click on
„Remote
control".
• Now you may control the vacuum cleaner
similarly as with a standard remote control
panel.
• Click „Exit" to exit the mode.
ENG
ENG - 42