Monitoring Of Service Life Of Components; Find The Vacuum Cleaner" Function; D Map; Setting Of Sharing - eta MASTER 2 PRO Gebrauchsanleitung

18. MONITORING OF SERVICE LIFE OF COMPONENTS

• Go to settings „
• Click on „Consumables
1
• You may here easily obtain information on
the service life of particular components
of the vacuum cleaner (HEPA filter, side
brushes, main brush, mop).
• After the replacement of one of the
components, it is necessary to reset it to
start the deduction of percents from 100%.
2
• To do it, click on the corresponding
component first.
• Then, click on „Confirm" to confirm the
reset.
REMARKS:
• The lifetime of each component is counted down and is given
in % and hours/minutes (how much lifetime is left).
• After the lapse of the service life of a component, we recommend
that you replace this component to keep in the best way efficiency of
suction and to prevent the vacuum cleaner from possible damage.
19. „FIND THE VACUUM CLEANER" FUNCTION
".
management".
1
REMARKS:
• This function can be used, especially, if the vacuum cleaner gets
jammed in whatever part of the house (for example, under furniture).
1
NOTE:
• This mode is in an experimental phase, some of its functions (e.g.
adding furniture) are rather illustrative and cannot be used to their full
potential yet.
• Go to settings „ ".
• Click on „Seek Robot".
• Then click on „Find Robot".
• After it, the vacuum cleaner will warn you
acoustically to specify its position.

20. 3D MAP

• On the main screen, as part of automatic
cleaning, you can switch the map to a
three-dimensional 3D view and view the
area from different angles by tilting.

21. SETTING OF SHARING

• Click on the pencil symbol
1
upper corner of the main screen.
• Select „Share Device" in menu.
2
• Click on „Add".
• After that, choose a country and enter
e-mail of the account with which you want
3
to share the vacuum cleaner.
• Click on „Done" to exit.
ENG
in the right
ENG - 43