Map Creation - eta MASTER 2 PRO Gebrauchsanleitung

4. MAP CREATION

• It may appear at first start-up following
1
prompt, complete it and click „Next" to
continue.
• To start automatic cleaning and creating
2
a map, click „Start creating
Alternatively, click „Skip" to go to the app.
• Place correctly the charging station in
keeping with instructions in the manual.
• After that, place the vacuum cleaner onto
the charging station and wait until the
vacuum cleaner is fully charged.
• Make available all rooms, in which you
want to clean up regularly (open the
3
doors and remove all obstacles, which
could prevent the vacuum cleaner from
movement).
• Select automatic cleaning (1.) and turn it
on by clicking on the Start / Stop (Pause)
icon (2.) , this will turn the vacuum cleaner
1.
into automatic cleaning mode and let it
clean the entire accessible space.
2.
• The vacuum cleaner starts mapping the
• If you would like to speed up this operation,
4
• As soon as the vacuum cleaner maps out
5
map".
• After that, you may save the map and
• If you want to save a map, click on „
6
• Select
• Then, click on
available space. This operation may take
longer depending on the size of the floor area.
Important!
To create and save a new map, you must
vacuum cleaner to complete AUTO cleaning!
7
activate a pause during cleaning and temporarily
limit the already mapped space with a prohibited
zone (do not place the zone near the station
or the robot) - the robot will only clean the rest
of the unbounded space, thus shortening the
cleaning time.
To explore the map faster, you can first send
the robot using local cleaning to the edge of the
newly discovered map and then activate the
automatic cleaning, see above.
REMARKS:
• Save each map which you would like to use for a long time.
• In total, you can create an save up to 5 maps. This option may be
and cleans up the whole available area, it
used, especially, in case of multistage houses.
will return back to the charging station.
• If you want to create the next new map, always delete the actual map
so that the vacuum cleaner started on a clear screen.
continue to work with it.
• If the current map is updated (eg. with a new room that was
unavailable during mapping), save the map again after cleaning and
this update is complete.
"
(in the right lower corner).
„Room Manage" in menu.
„Save Home Map" to save
the map.
• Then the map will be available for possible
future loading and switching between
multiple maps. You can load the selected
map by clicking on „Use map".
ENG
ENG - 38