Tank Suction; Uvc Lamp; Planning Of Cleaning - eta MASTER 2 PRO Gebrauchsanleitung

REMARKS:
• To use the mopping function, the mopping attachment must be
installed in the vacuum cleaner according to the instructions for use.
• When using the mopping function, the vacuum cleaner must be
prevented from hitting the carpet - ideally by using the „Evade"
function, see next chapter.
• In case of local cleaning, the vacuum cleaner is automatically
switched over to the highest stage of suction power. However, even
in this mode, it is possible to adjust suction power where necessary
(unless custom settings are activated).

11. TANK SUCTION

A.
• Go to settings „
• Click on „Dust
collection".
B.
• You have 3 setting options:
1
A) Canceling extraction – the extraction
unit will be switched off.
B) Suction after cleaning – setting
of suction after a certain number of
C.
cleanings.
C) Vacuums now – starts vacuuming the
tank

12. UVC LAMP

• Go to settings „
1
• Click on „UVC
Mode".
2
".

13. PLANNING OF CLEANING

1
".
2
• Then the UV lamp can be switched
on or off.
3
• If you only want to carry out separate
disinfection with UV light, turn on
mode". Vacuuming is then
„Sterilization
switched off in this mode.
4
• Go to settings „ ".
• Click on „Schedule".
5
• Click on „Add".
• Set the time at the top.
• In the „Repeat" menu, you set the days
when you want to repeat the cleaning.
• In the „Suction force" menu, you can set
the suction power.
• In the „Water Level" menu, you set the
mopping intensity.
• In the „UVC" menu, select the option to use
UVC light.
• In the „Cleaning mode" menu, choose
whether you want to use AUTO cleaning
or cleaning of specific rooms.
• Save the settings by clicking „Save"
in the top-right corner.
• Individual cleanings can be activated ( )
or deactivated ( ).
• To make adjustments to any of the of a
scheduled cleaning, briefly click on the
schedule with your finger.
• To add another plan, click on .
• If you want to delete a scheduled cleaning,
click on the relevant schedule with your
finger and at the same time reveal the
„Delete" option by sliding your finger to
the left (iOS), or click and hold on the item
(Android)..
• Click on „Delete" to delete the schedule.
ENG
ENG - 41